Why is mounting over a fireplace more expensive?

Masonry, tile, or stone needs masonry bits and anchors, a tilting mount is usually required, and routing power and HDMI around a firebox is harder. Heat can also force a taller mount or a recessed niche, all of which add labor.

Does hiding the wires cost extra?

Yes. A paintable surface raceway adds a little. A true in-wall installation with a recessed power kit adds roughly $100–$300 because it means cutting the wall, fishing cable, and installing a code-rated outlet behind the TV.

Is it cheaper to mount a TV myself?

Yes. On a wood-stud drywall wall with a fixed mount, you only pay for the mount, around $30–$80. The trade is your time and the risk of a crooked or under-anchored install. Hire out fireplaces, masonry, and hidden wiring.

How much does TV mounting cost in 2026?

Q: How much does TV mounting cost?

A standard wall mount runs about $100–$300 for labor. Hidden in-wall wiring pushes it to $250–$600. Mounting over a fireplace or on brick, tile, or stone typically runs $300–$800 or more. The mount hardware itself is $20–$200 on top.

A standard TV mount runs $100–$300 in labor. Add hidden in-wall wiring and it's $250–$600. Mounting over a fireplace or onto brick, tile, or stone is usually $300–$800 or more. The mount hardware itself is a separate $20–$200 depending on whether it's fixed, tilting, or full-motion.

Those are real ranges, not a rounded guess. Below is exactly what moves the price up, plus the honest cases where you should skip hiring anyone and do it yourself.

What each job actually costs

Standard drywall mount, wires visible

$100–$300

A fixed or tilting mount on a wood-stud wall, cables dropped to a console or run in a surface raceway. The most common job and the easiest to price.

In-wall hidden wiring

$250–$600

Cutting the drywall, fishing HDMI and power, and adding a code-rated recessed outlet behind the TV so nothing shows. The clean look most people want, and the bulk of the upcharge.

Fireplace, brick, tile, or stone

$300–$800+

Masonry bits and anchors, a tilting or pull-down mount, and tricky wire routing around a firebox. Hardest surface, most time, highest price.

What moves the price

→ Wall surface. Drywall is cheapest. Brick, tile, plaster, and concrete need special hardware and more time.
→ Wire concealment. Visible is free, raceway is small, true in-wall adds the most because it's electrical work.
→ Mount type and TV size. Full-motion mounts and 75-inch-plus sets need heavier hardware and often a second installer.
→ Height and access. Above a fireplace or on a tall vaulted wall means ladders and more careful leveling.
→ Extras. Adding an outlet, a soundbar, or new HDMI runs each adds line items.

When you should not pay for it

DIY is the right call when:

• It's a wood-stud drywall wall and you're fine with visible or raceway wiring.
• You're using a fixed or tilting mount, not full-motion.
• You have a stud finder, a level, and a drill — then your only cost is the $30–$80 mount.

Pay a pro when it's masonry or tile, a fireplace, fully hidden wiring, or a heavy set where a dropped TV would cost far more than the install.

Run a TV mounting or install business?

A page like this — answer-first, with your real prices — is what gets you found by people ready to book. Here's what clients say about the sites we build.

We don't post stock testimonials. On a 15-minute call we screen-share the real dashboards behind our own businesses — live leads, rankings, and the exact page that produced each one. See the proof →

Plans are $249/mo for the site plus AI lead capture, $597/mo with the SEO content engine and attribution, and from $1,750/mo for the full CRM and reputation stack. Month-to-month, you own it, one company per market. We run our own cleaning and HVAC companies on the same system. See what local SEO costs, install-trade website design, and the AI receptionist.

Common questions

Why is over-the-fireplace mounting pricier?

Masonry and tile need special anchors, a tilting or pull-down mount is usually required, and routing power around a firebox is slow work. Heat can also force a recessed niche.

Does hiding wires really add that much?

A surface raceway is cheap. True in-wall wiring adds roughly $100–$300 because it's electrical work — cutting the wall and adding a rated recessed outlet behind the TV.

Is the mount included in the labor price?

Usually not. Expect $20–$80 for a fixed or tilting mount and up to $200 for a quality full-motion arm, on top of the install labor.

Want to be the install pro
people find first?

Send your company name and metro — we'll confirm your market is open and build a working demo within 48 hours. Free, no card, no commitment.

Prefer email? [email protected]