Recessed lighting runs about $100 to $300 per light installed, including the fixture and labor, so a standard room with four to six can lights usually lands around $500 to $1,500. The biggest swing is whether the electrician is wiring into an existing ceiling fixture or running new circuits and patching drywall. The fixtures themselves are cheap; the labor and the wiring are what you are paying for.
We run our own home-service companies, so this is a real cost guide with honest numbers. Here is what you will actually pay, what moves it, and when you can safely do it yourself.
Canless or retrofit LED lights you install where wiring is already accessible. Mostly hardware cost. Best when you are replacing an existing fixture or have attic access above the room.
An electrician cutting the hole, wiring, mounting, and finishing one light cleanly. The per-light rate drops as you add more on the same visit.
A full room laid out, wired to a dimmer, and finished. The lower end is an open or accessible ceiling; the higher end is new circuits and drywall patching in a finished room.
Multiple rooms, new circuits, switching and dimming zones, and high or vaulted ceilings. Cheapest to do during an open-ceiling remodel before the drywall goes up.
Recessed lighting can be a reasonable DIY project in the right situation. Handle it yourself if:
Hire a licensed electrician when you need a new circuit, work at the panel, conduit, fishing wire through finished walls, or anything that requires a permit. Those are the cases where a mistake means a code failure or a fire risk, and the cost of doing it right is worth it.
This is the kind of page we build for electricians: an answer-first cost guide that catches homeowners mid-search, then sends the ones who would rather hire it out straight to your phone. We run our own home-service companies on the same stack, so the site ships with 24/7 AI lead capture and tracking already wired.
Plans start at $249/mo for a hand-built site plus AI lead capture, $597/mo adds the monthly SEO engine and lead attribution, and from $1,750/mo adds a custom CRM and reputation automation. Month-to-month, you own everything, free demo in 48 hours. See electrician web design, electrician SEO, or SEO for home services.
We don't post stock testimonials. On a 15-minute call we screen-share the real dashboards behind our own businesses — live leads, rankings, and the exact page that produced each one. See the proof →
About $100 to $300 per light installed, fixture and labor included. A standard room of four to six can lights usually lands around $500 to $1,500, with new wiring and a finished ceiling pushing higher.
Yes, if you are comfortable with basic electrical work. Fixtures often cost only $10 to $40 each, so a DIY job is mostly hardware. The savings are real, but you take on the wiring and code compliance.
New wiring and a switch or dimmer, working in a finished ceiling versus open framing, rated housings, high or vaulted ceilings, and the number of lights. New circuits and patching drywall add the most.
A confident homeowner can install retrofit LED cans where there is existing wiring or attic access. Adding a new circuit, conduit, or anything at the panel should go to a licensed electrician.
Send your company name and metro — we will confirm your market is open and build a working website and lead-capture demo within 48 hours. Free, no card, no commitment.
Prefer email? [email protected]
Free working demo in 48 hours · No contracts · You own the site · One company per market