A radon mitigation system costs about $800 to $2,500 installed, with most homes landing near $1,200 to $1,500. The standard fix — a sub-slab depressurization system with a fan and a vent pipe run to the roofline — falls in that range. Crawl spaces, multiple foundation sections, and slab-on-grade homes cost more.
We build websites and SEO for radon, basement, and environmental contractors, and we run our own home-service companies. Here's the honest breakdown — starting with the test you need before you spend a dollar on a system.
A DIY kit runs $15 to $50; a professional short-term test runs $100 to $150. Always test before installing anything. Many homes come back below the action level and need no system.
Sub-slab depressurization with one fan and a vent pipe. The most common system and the one most quotes are built around.
Crawl spaces need a sealed vapor barrier, and homes with multiple slabs or additions need more suction points and pipe. Both push the total up.
Radon mitigation is not always the right purchase. Hold off if:
Hire a certified mitigator when readings are well above the action level, the foundation is complex, or you want a guaranteed result with a post-install retest. Radon is a real health risk, so the cheapest path is the one that actually lowers the number.
If you install radon systems, a page like this reaches homeowners right after a failed test, when they're ready to act. We hand-build the site, add 24/7 AI lead capture, and publish researched cost guides every month. Plans run $249/mo for the site plus lead capture, $597/mo to add the monthly SEO engine, and from $1,750/mo for the full CRM and reputation stack. Month-to-month, and you own everything. See basement and foundation website design, SEO for home services, or what local SEO costs.
We don't post stock testimonials. On a 15-minute call we screen-share the real dashboards behind our own businesses — live leads, rankings, and the exact page that produced each one. See the proof →
Only if a test shows radon at or above 4.0 picocuries per liter, the EPA action level. Test first with a cheap kit. Many homes are below it and need nothing.
A little. The fan runs continuously and uses roughly $5 to $15 of electricity a month, plus a fan replacement every 5 to 10 years at $150 to $300.
A properly installed system usually cuts levels by 80 to 99 percent. Always retest after install to confirm — a certified mitigator should include or recommend that step.
Send your company name and metro — we'll confirm your market is open and build a working demo within 48 hours. Free, no card, no commitment.
Prefer email? [email protected]